982 Semi Automatic Glue Dispenser, Solder Paste Liquid Vacuum Back Suction Adhesive Controller Dropper Machine for Yellow Glue, Quick-Drying Glue, Epoxy Resin

SpecificationColor: BlackModel: 982Material: MetalSpitting Mode: Manual / Semi-automaticMinimum Drip Volume: 0.01mlSpitting Time Interval: 0.1-9.9sAutomatic Timing(Can Be Set): 0.01-30s Repeat Accuracy: ±0.5%Internal Voltage: 12-24DCInput Air Pressure: 2.5-7bar(35-100psi)Output Air Pressure: 0.1-5.5bar(1-78psi)Power Supply: 110V AC, 60Hz Power Consumption: 20WPlug Specification: American Standard 110VProduct Size:23*15*6cm/9.05*5.9*2.36inPackage Size:20*26*14cm/10*9*12.5inGross Weight: 2.1kg/4.63 lbsPackage Included1* Dispenser Main Unit1* Manually Switch1* Foot Switch1* Air Tube1* Connection Tube1* Power Cord1*Dispenser Stand2* 30CC Liquid Barrels6* Dispensing Needles1* Chinese and English ManualNotes: 1. The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.2. If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.3. Automatic state, the general air pressure adjustment in the machine at 1-2.7 bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation.

• VACUUM BACK SUCTION - This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively prevent the glue from dripping during use to achieve a more accurate glue dripping and ensure a clean and tidy working environment.
• PRECISE DRIP - The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
• SEMI-AUTOMATIC DESIGN - It can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method.
• HIGH-PRECISION AIR PRESSURE GAUGE - The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break.
• ANTI-IMPREGNATION DESIGN - It is equipped with high-quality electronic valves, with a certain anti-impregnation function, to better ensure operational safety and can also effectively extend the life of the semi-automatic glue dispenser machine.